Free site-specific O&M program
What does your site really need in an O&M program?
Upload your plans and equipment list. We'll build a maintenance program from your manufacturers' specs, your racking and your site conditions, reviewed by a SolarCare tech before it reaches you.
Answer the question for your siteThe question
Can you say exactly what your site needs, and why?
Your equipment came with its own maintenance rules. Your O&M program should be built from them, not from a generic template.
Most O&M scopes are copy-paste
The same checklist gets dropped on every site, whatever trackers, inverters or modules are actually in the field. Tasks your equipment needs get missed, and you pay for tasks it doesn't.
The real rules are buried in manuals
Torque re-checks, tracker drive lubrication, inverter filter and fan service, cleaning methods the module warranty allows — each manufacturer sets its own intervals, and they sit in manuals nobody reads.
Missed tasks can cost you the warranty
Many equipment warranties depend on documented maintenance. NFPA 70B (2023) now requires a documented electrical maintenance program. If it isn't written down for your equipment, it's hard to prove it was done.
What you get
A program written for your equipment, your racking and your ground.
Every task tied to the piece of equipment it's for, how often it's needed, and where the requirement comes from — with the tasks your warranties depend on flagged. Upload your current O&M scope and we'll show you the gaps.
Example only — not a real site
Example site program
Ground-mount · single-axis trackers · string inverters · bifacial modules
| Equipment | Task | Frequency | Basis |
|---|---|---|---|
| Trackers | Torque check, slew drive lubrication | Annual | Warranty-required |
| Inverters | Filter clean, fan test, firmware check | Semi-annual | Mfr O&M manual |
| Combiners | IR scan, torque check, fuse check | Annual | NFPA 70B |
| Modules | Wash, rear-side soiling check (bifacial) | Based on soiling | Module spec |
| Site | Vegetation control under low panel edge | 3x per season | Site conditions |
- Task list by equipment
- Visit calendar for the year
- Warranty-required tasks flagged
- Gaps vs. your current O&M scope
How it works
From your plan set to a program you can run.
Upload your build
Plan set, equipment list with model numbers, datasheets if you have them, and what you're doing for O&M today.
We pull the specs
We match every model number to its manufacturer O&M manual, warranty terms and the standards that apply.
A SolarCare tech reviews it
Nothing goes out unreviewed. A tech checks every task against your build and your site conditions.
You get your program
A site-specific maintenance program, delivered within 5 business days of receiving your equipment list.
Get your program
Drop your site in. We'll tell you what it really needs.
Free for ground-mount commercial, community and utility-scale sites. Reviewed by a SolarCare tech and delivered within 5 business days.
